Advertisement
In the Advanced System Setup sub menu, the following settings
can be made:
Display Content allows the selection of the permanent operation
display. The volume setting enables the permanent display of the
volume menu; alternatively, the preAV logo can be displayed.
Under Display Light the illumination level of the display is defined:
normal: permanently full brightness
auto dim: dims brightness automatically after 10 seconds
auto off: turns off the display automatically after 10 seconds.
In the Crossover Setup submenu, high-pass filters or, in the case
of the subwoofer channel, a low-pass filter can be activated for
each of the specified channels and the appropriate crossover fre-
quency can be set.
Full Band
High or low pass is not activated.
50 Hz ... 140 Hz
High or low pass is activated by steps of 10 Hz
In the sub menu Distance Setup, there can be set the distance to
your listening place for each channel. The preAV sets the signal
propagation time of the channels appropriately according to this
information.
13
Advertisement
