Download Print this page
T&D log-EZ User Manual

T&D log-EZ User Manual

Thermo recorder

Advertisement

Quick Links

Thermo Recorder
User's Manual
Package Contents
Before use, please confirm that all of the contents are included.
Data Logger
Stand
Screw x 2
User's Manual
Safety Instructions
and Specifications
Introduction
Thermo Recorder log-EZ is a handy Bluetooth data logger designed to measure
and record temperature and humidity data, and which is accessed using the T&D
Thermo application running on a mobile device.
By using our free cloud service, you can access collected data via a web browser
and analyze with the T&D Graph Windows application.
Bluetooth
The following application is available for mobile devices with iOS and Android
operating systems.
T&D Thermo
Mobile app for device configuration, data collection and graphing, data upload
to the cloud, and report creation
Device Preparation
Battery Installation
How to Use the Stand
© Copyright T&D Corporation. All rights reserved. 2023.3 16504740046 (1st Edition)
Model No.
TR32B
AA Alkaline Battery
Registration Code
(LR6)
Warranty
Cellular
Internet
WiFi
Recording will begin upon insertion of the battery.
Default Settings
Recording Interval: 10 minutes
Recording Mode: Endless*
*Upon reaching the logging capacity, the oldest data will be
overwritten and recording will continue.
Slightly bend the stand into a curved shape, and insert the
logger through the round holes of the stand so that the stand
holds the unit.
It can then be placed on a flat surface such as a table or
desk, or by using the supplied screws hung on a wall.
The Display
Marks on LCD Screen
Connection/Communication Status
ON: Bluetooth Connected
BLINKING: Bluetooth Communication in progress
Battery Warning Mark
When this appears, replace the battery as soon as possible. A low battery may cause communi-
cation errors.
Messages
Label
Connection LED
BLINKING (in blue):Bluetooth Connected (LED can be disabled from the app.)
OFF:Bluetooth Not Connected
Recording Intervals & Maximum Recording Times
Estimated Time until Logging Capacity (8,000 data sets) is Reached
Rec Interval
Time Period About 2 hours
For details about how to use the
log-EZ, refer to the HELP available from the following
website.
manual.tandd.com/log-ez/
T&D WebStorage Service
T&D WebStorage Service (hereinafter referred to as "WebStorage" )
is a free cloud storage service provided by T&D Corporation.
It can store up to 450 days of data depending on the recording
interval set for the device. Using in conjunction with the "T&D Graph"
software allows for downloading stored data from the WebStorage
for analysis on your computer.
A new WebStorage account can also be created through the T&D Thermo App.
Refer to "T&D Thermo (Basic Operations)" in this document.
Low Battery Condition
After the battery warning mark is displayed, if you continue
to use the logger without replacing the battery, this message
will appear alternately with the current temperature and
humidity.
When this appears, the recording will continue but Bluetooth
communication will stop.
Operation Stopped
If the battery is further left unchanged until the LCD display
goes blank, all recorded data in the logger will be lost.
Connection LED
1 sec.
30 sec.
1 min.
About 2 days
About 5 days
18 hours
13 hours
Thermo Recorder
10 min.
60 min.
About 11
About 55 days
months
T&D WebStorage Service
Registration / Login
webstorage-service.com

Advertisement

loading

Summary of Contents for T&D log-EZ

  • Page 1 BLINKING (in blue):Bluetooth Connected (LED can be disabled from the app.) OFF:Bluetooth Not Connected Thermo Recorder log-EZ is a handy Bluetooth data logger designed to measure and record temperature and humidity data, and which is accessed using the T&D Thermo application running on a mobile device.
  • Page 2 T&D Thermo (Basic Operations) Collect Data from the Logger 4.1 In the list on the home screen, tap the target ⑨ [Device] to open the Device Info Download the App screen. When you tap the ⑩ [Bluetooth Button], the app will connect to the device, collect data and plot a graph.