Table of Contents
Advertisement
Treated water is discolored.
Faucet Aerators are Plugging with Calcium
Deposits
MAINTENANCE
THE SYSTEM MUST BE DEPRESSURIZED BEFORE REMOVING ANY COMPONENTS FOR
SERVICING. TO DEPRESSURIZE THE SYSTEM, CLOSE YOUR MAIN WATER SHUT-OFF
VALVE AND RUN WATER AT SEVERAL FAUCETS.
Cleaning
The outside of your system, including cartridge filter housing and media tank, can be
washed with a mild soap and water if desired. Do NOT use strong cleaners as they may
cause damage to the system components.
rate demands do not exceed capacity
specifications.
During the initial start-up and for roughly the
first week after installation, you may notice
small black specs or a grey/black
discoloration caused by carbon fines (dust).
This is normal and will go away on its own.
The carbon dust is not harmful. Air trapped
in your water lines after installation can
sometimes cause the water to appear milky.
If you fill a glass of water and it appears milky
at first, but clears relatively quickly, this is
likely due to micro air bubbles. This situation
is harmless and will go away as the air is
completely purged out of your system.
See "What to Expect in the First Few Weeks"
above.
24
Advertisement
Table of Contents
