Table of Contents
Advertisement
Step 11. – Connect Bridge Assembly to the ecoPLUS™ Bypass
Thread the bridge assembly on to the outlet side of the ecoPLUS™ bypass assembly as
shown.
Step 12. – Connect ecoTAC™ System
Confirm that the ecoTAC™ treatment tank is perpendicular to the floor and the
ecoPLUS™ treatment tank.
The black base of the media tank is not permanently attached
to the rest of the tank. If your tank appears to be crooked, the base has likely been knocked
out of alignment during shipping. This can be correct by picking the tank up and tapping it
on a hard surface while holding it perpendicular to the floor. A few light taps will generally
straighten it out.
Thread the bridge assembly on to the inlet side of the ecoTAC™ bypass assembly as shown.
17
Advertisement
Table of Contents
