Communication Connection; Dry Contact Signal; Bms Communication - Sun Gold Power BluePower SP6548 User Manual

Sun Gold Power Co.,Ltd

Communication Connection

Serial Connection
Please use the supplied serial cable to connect between the inverter and your PC. Install the monitoring
software from the bundled CD and follow the on-screen instructions to complete your installation. For detailed
software operation, refer to the software user manual on the bundled CD.
Wi-Fi Connection
This unit is equipped with a Wi-Fi transmitter. Wi-Fi transmitter can enable wireless communication between
off-grid inverters and monitoring platform. Users can access and control the monitored inverter with
downloaded APP. You may find "WatchPower" app from the Apple
Play Store. All data loggers and parameters are saved in iCloud. For quick installation and operation, please
check Appendix III.

Dry Contact Signal

There is one dry contact (3A/250VAC) available on the rear panel. It could be used to deliver signal to external
device when battery voltage reaches warning level.
Unit Status
Power Off Unit is off and no output is powered.
Output is
powered
from Battery
power or
Solar energy.
Power On

BMS Communication

It is recommended to purchase a special communication cable if you are connecting to Lithium-Ion battery
banks. Please refer to
Condition
Program 01
set as USB
(utility first)
or SUB (solar
first)
Program 01 is
set as SBU
(SBU priority)
Appendix II- BMS Communication Installation
® Store or "WatchPower Wi-Fi" in Google
Battery voltage < Low DC
warning voltage
Battery voltage > Setting
value in Program 13 or
battery charging reaches
floating stage
Battery voltage < Setting
value in Program 12
Battery voltage > Setting
value in Program 13 or
battery charging reaches
floating stage
for details.
12
www. sungoldpower.com
Dry contact port:
NC & C NO & C
Close Open
Open Close
Close Open
Open Close
Close Open
®