Advertisement
6. TROUBLESHOOTING
To clean the filter [ Fig. T1 ]:
v Unscrew the spray lanze
(1)
, remove the filter
Problem
Possible Cause
Pump does not build up
Pump handle
pressure
screwed on.
Hose connection at the
container and hand valve
is not tight.
Permanent lock
handle is locked.
Sealing cap
defective.
(11)
Pressure Sprayer does not
Nozzle
spray although there is
sufficient pressure or only
(14)
Filter
sprays with a weak spray jet
It is difficult to open and
Container pressure too high.
close the container
NOTE: For any other malfunctions please contact the GARDENA
service department.
7. TECHNICAL DATA
Max. capacity
Spray tube length
Permissible working pressure
Max. permissible operating temperature
8. SERVICE / WARRANTY
In the event of a warranty claim, no charge is levied to you for the services
provided.
GARDENA Manufacturing GmbH offers a two-year warranty (effective as
of the date of purchase) for this product. This warranty includes all signifi-
cant defects of the product that can be proved to be material or manufac-
turing faults. This warranty is fulfilled by supplying a fully functional replace-
ment product or by repairing the faulty product sent to us free of charge;
we reserve the right to choose between these options. This service is sub-
ject to the following provisions: The product was used for its intended
purpose as per the recommendations in the operating instructions. Neither
the purchaser nor a third party has attempted to repair the product. This
manufacturer's warranty does not affect warranty entitlements against the
dealer / retailer. If problems arise with this product, please contact our
Service department or send the defective product along with a brief descrip-
tion of the fault to GARDENA Manufacturing GmbH, making sure to have
suffi ciently covered any shipping costs and to have followed the relevant
postage and packaging guidelines. A warranty claim must be accompa-
nied by a copy of the proof of purchase.
(14)
and clean it.
Remedy
(10)
too lightly
v Screw on pump handle
tighter.
v Tighten the hose connec-
tions at the container and
hand valve.
(13)
on the
v Release the permanent
(13)
lock
on the handle.
(16)
is dirty /
v Clean / exchange sealing
(16)
cap
.
is blocked.
v Unscrew nozzle
clean.
(14)
is clogged.
v Remove filter
spray lance and clean it.
v Release the container
pressure completely
by means of the safety
relief valve
(9)
.
(10)
(11)
and
from the
5 l
36 cm
3 bar
40 °C
5
Advertisement
