Ebyte E78-915LN22S (6601) User Manual page 15

Chengdu Ebyte Electronic Technology Co., Ltd.
instruction
CGMI
CGMM
CGMR
CGSN
CGBR
CJOINMODE
CDEVEUI
CJOINMODE
CDEVEUI
CAPPEUI
CAPPKEY
CDEVADDR
CAPPSKEY
CNWKSKEY
CFREQBANDMASK
CULDLMODE
CWORKMODE
CCLASS
CSTATUS
CJOIN
DTRX
REGION
JOINDR
Order
CCONFIRM
CAPPPORT
CDATARATE
CRSSI
CNBTRIALS
CTXP
CLINKCHECK
CADR
CRXP
CRX1DELAY
CSAVE
CRESTORE
IREBOOT
Copyright © 2012–2022 , Chengdu Ebyte Electronic Technology Co., Ltd.
Read the manufacturer's logo
Read the module ID
Read version ID
Read product serial number identification
Set the baud rate of the UART
Set read Join mode (OTAA, ABP)
Set to read DevEUI (when OTAA is connected to the network)
Set read Join mode (OTAA, ABP)
Set to read DevEUI (when OTAA is connected to the network)
Set to read AppEUI (when OTAA is connected to the network)
Set to read AppKey (when OTAA is connected to the network)
Set to read DevAddr (when ABP is connected to the network)
Set to read AppSkey (when ABP is connected to the network)
Set to read NwkSkey (when ABP is connected to the network)
Set the read frequency mask (FreqBandMask)
Set read Ul/Dl mode (same frequency or different frequency)
Set read working mode (normal working mode)
Set the read class type (Class A/C)
CBL Read battery level
read node status
Initiate OTAA network access
Send and receive data frames
DRX Get the latest received data from the Rx buffer and empty the Rx buffer
Setting Region (EU868/US915)
Set the network airspeed
Description (MAC related configuration commands)
Set the type of read and send messages (confirm or unconfirm)
Set the read application layer Port
Set read data rate
Get the RSSI value of the channel
Set read NbTrans parameters
CRM Set read report mode
Set read transmit power
Enable Link check
Enable or disable ADR
Set read receive window parameters
Set the delay for reading TX and RX1
save configuration
restore default configuration
System reset
Description (common command)
E78-915LN22S(6601) User Manual
14