Table of Contents
Advertisement
Installation (continued)
6
Sealing the mounting surface
□
Apply silicone or RTV compound (not included) between the
edges of the xture body (A) and wall.
Care and Cleaning
□
Clean the light xture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem
The bulb will not light.
The fuse blows or a circuit
breaker trips when the light is
turned on.
A
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ There is a faulty wire
connection.
□ The circuit breaker is off.
□ There is an exposed wire.
□ There are too many items on
one circuit.
Solution
□ Replace the light bulb.
□ Ensure that the power supply is turned on.
□ Check the wiring.
□ Ensure that the circuit breaker is set in the on
position.
□ Discontinue use of the light xture.
□ Contact a quali ed electrician or call the
Customer Service Team at 1-800-986-3460.
□ Unplug other items on the circuit.
7
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
Advertisement
Table of Contents
