Home Decorators Collection LAMPSON HDP00766 Use And Care Manual page 6

Installation (continued)
3
Connecting the wires
□
Install the xture bare copper ground wire (1) under
the ground screw (EE) on the mounting plate (BB).
□
Connect the xture bare copper ground wire (1) to
the green (or bare, or green and yellow) supply
ground wire (2) in the outlet box using a wire nut
(AA).
□
Connect the white xture wire (3) to the white (or
ribbed) supply wire (4) in the outlet box using a wire
nut (AA).
□
Connect the black xture wire (5) to the black (or
red, or blue) supply wire (6) in the outlet box using
a wire nut (AA).
EE BB
House wire
Black
(or red, or blue)
(HOT)
House wire
White
(NEUTRAL)
House wire
Green
(or bare wire,
or green & yellow)
(GROUND)
2 6 1 5
AA
4 3
Fixture wire
Black
(HOT)
Fixture wire
White
(NEUTRAL)
Fixture wire
Bare wire
(GROUND)
4
Mounting the fixture body
□
Push all excess wires into the outlet box.
□
Align the holes in backplate with the holes in mounting plate (BB),
and then secure the xture body (A) to the wall with two rubber
washers (FF) and two mounting screws (DD).
A
BB
DD
FF
5
Installing the bulbs
□
Prior to installing the bulbs, inspect sockets for silica packets.
If packets are present, then remove and throw away. Do not
expose to children or pets.
□
Install two 120V, 60Hz, 60-Watt max., candelabra-base type B
bulbs (not included) into the sockets (B) of the light xture.
6
Bulb
(Not included)
B