Advertisement
ADJUSTABLE STORAGE SYSTEM
SHELF BRACKETS
GENERAL INFORMATION:
• Double wall construction provides
adjustability in heavy-duty applications.
• Four tabs allow Brackets to mount into
Uprights.
- Top two tabs hold weight,
- Bottom two tabs stabilize Bracket and
prevent it from being knocked up and out
of Upright.
• Bracket lengths represent the overall length
from the face of the Upright.
• Bracket extends at a 1° incline from back of
Bracket.
• Bracket load capacity calculated assuming
even loading over length of Bracket.
• Weight load capacity of Brackets depends
upon properly installed Uprights.
• All Brackets fit all Uprights.
COLORS:
• White (-11)
• Nickel (-45)
MATERIAL SPECIFICATIONS:
Brackets:
• .065 (1.6mm) 1008 steel.
• Single piece of formed steel.
INSTALLATION:
• Wood shelves are secured to Brackets using
Shelf Locators (double face tape) or Shelf
Screws (for more permanent applications).
BRACKET/UPRIGHT SPACING:
• General Spacing of Uprights and Brackets --
Melamine Shelving:
36" - standard closet use.
30" - pantries or garages
24" - extra heavy-duty use
MISCELLANEOUS:
• All measurements are ± 1/8" (2mm).
• Drawings are not to scale.
SCHULTE freedomRail Training Manual
Technical Specifications
SOLID SHELF BRACKET
(SSB)
7913-1413-11 (-45)
Type of Shelf
Wood
Length:
12.5 (317.5mm)
Load Capacity: 130 lbs (59 kg)
Weight Ea:
.74 lbs (.276 kg)
Case:
10
23
Page
Advertisement
