About The User Interface; Components: Wireless Remote Control; Status: Wireless Remote Control Lcd - Daikin ATXF25E5V1B Operation Manual

WARNING
▪ Do NOT modify, disassemble, remove, reinstall or
repair the unit yourself as incorrect dismantling or
installation may cause an electrical shock or fire.
Contact your dealer.
▪ In case of accidental refrigerant leaks, make sure there
are no naked flames. The refrigerant itself is entirely
safe, non-toxic and mildly flammable, but it will
generate toxic gas when it accidentally leaks into a
room where combustible air from fan heaters, gas
cookers, etc. is present. Always have qualified service
personnel confirm that the point of leakage has been
repaired or corrected before resuming operation.
INFORMATION
The following figures are just examples and may NOT
completely match your system layout.
c d
a Air inlet
b Air outlet
c Flap (horizontal blade)
d Louvers (vertical blades)
e Front panel
f Model name plate
g Room temperature sensor
h Signal receiver
i Operation indicator (green)
j Timer lamp (orange)
k Indoor unit ON/OFF switch
l Air filter
ON/OFF button
If the user interface (e.g. wireless remote control) is missing, you can
use the ON/OFF button on the indoor unit to start/stop operation.
When operation is started using this button, the following settings
are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
3.2

About the user interface

Wireless remote control
INFORMATION
The indoor unit is delivered with the wireless remote
control as the user interface. This manual describes only
operation with this user interface. If another user interface
is connected, refer to the operation manual of the
connected user interface.
ATXF20~42E5V1B
Daikin room air conditioner
3P520336-20V – 2022.09
a
h
i
j
k
ON/OFF
l
▪ Direct sunlight. Do NOT expose the wireless remote control to
direct sunlight.
▪ Dust. Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
▪ Fluorescent lights. Signal communication might be disabled if
fluorescent lamps are in the room. In that case, contact your
installer.
▪ Other appliances. If the wireless remote control signals operate
other appliances, move the other appliances, or contact your
installer.
▪ Curtains. Make sure that curtains or other objects do NOT block
the signal between the unit and the wireless remote control.
NOTICE
▪ Do NOT drop the wireless remote control.
▪ Do NOT let the wireless remote control get wet.
3.2.1

Components: Wireless remote control

e
f
g
m
l
k
j
i
a Signal transmitter
b LCD display
c ON/OFF button
d Fan setting button
e Temperature adjustment button
f Swing button
g Timer cancel button
h ON timer button
i OFF timer button
j Comfort airflow button
k Econo button
l Mode selector button
m Powerful button
3.2.2

Status: Wireless remote control LCD

Icon
3 About the system
a
b
c
d
e
f
g
h
Description
Operation mode = Automatic
Operation mode = Drying
Operation manual
5