Table of Contents
Advertisement
NOTE: Do not leave your Suunto EON Steelin a bucket of water
(for rinsing). The display stays on under water and consumes battery
life.
Use only original Suunto accessories - damage caused by non-
original accessories is not covered by warranty.
TIP: Remember to register your Suunto EON Steel at
www.suunto.com/support to get personalized support.
4.2 Installing scratch guard
Use the provided scratch guard to help protect your Suunto EON
Steel from scratches.
To install the scratch guard:
1. Ensure the display glass is clean and dry.
2. Peel back the protective layer from one end of the scratch
guard.
3. Place exposed adhesive side down squarely on one end of the
display.
4. Pull back the protective layer from the scratch guard.
5. Press out any air bubbles with a soft, straight edge tool.
Watch the video on : YouTube.
76
Advertisement
Table of Contents
