Suunto Dm5 And Movescount; Synchronizing Logs And Settings - Suunto EON STEEL 1.4 User Manual

Table of Contents

WARNING: YOU ARE ADVISED TO AVOID FLYING ANY TIME THE

COMPUTER COUNTS DOWN THE NO-FLY TIME. ALWAYS ACTIVATE

THE COMPUTER TO CHECK THE REMAINING NO-FLY TIME PRIOR TO

FLYING! Flying or traveling to a higher altitude within the no-fly

time can greatly increase the risk of DCS. Review the

recommendations given by Divers Alert Network (DAN). There can

never be a flying-after-diving rule that is guaranteed to completely

prevent decompression sickness!

3.30 Suunto DM5 and Movescount

The Suunto DM5 software program allows you to track and analyze

all of your dive logs and plan your future dives. With DM5 you can

customize your Suunto EON Steel and update the device firmware.

Download Suunto DM5 from www.suunto.com/dm5.

NOTE: Mono framework is required when using DM5 on a Mac.

Movescount is an online sports community that integrates with

Suunto DM5. Through Movescount your can share your dives with

others.

To be able to synchronize logs and settings, you need to first install

3.30 Suunto DM5 and Movescount ).

Suunto DM5 (see

To download logs from your Suunto EON Steel and sync settings:

1. Start Suunto DM5.

Table of Contents