Operator's Manual - Husqvarna EPOS Reference station Operator's Manual

33.4 Safety instructions for
maintenance
WARNING:
instructions that follow before you use the
product.
• Disconnect the product from the power supply
before you clean or do maintenance on the
product.
34.1 Introduction
Serial number:
The serial number is on the product rating plate and on the product carton. Use the serial number to register your
product on www.husqvarna.com.
34.1.1 Support
For support about the product, speak to your Husqvarna
servicing dealer.
34.1.2 System description
The EPOS ™ system contains a robotic lawn mower,
a charging station and a reference station. The
robotic lawn mower and the reference station receives
satellite signals for positioning. The reference station is
stationary and sends correction data to the robotic lawn
mower to get an accurate position for the mower. The
work area is made virtually in an app by operating the
product and adding waypoints to make a map in an app.
1512 - 005 -
Read the warning

34 Operator's manual

33.5 In the event of a thunderstorm
To decrease the risk of damage to electrical
components in the reference station, we recommend
that the power supply to the reference station is
disconnected if there is a risk of a thunderstorm.
Connect the power supply again when there is no a risk
of thunderstorm.
34.1.3 Product description
Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
51 .
The product is a reference station that receives satellite
signals and sends correction data to the mower. One
reference station can be used for several robotic lawn
mowers.
Support on page
Operator's manual - 51