Table of Contents
Advertisement
LOGGING IN VIA COMMAND-LINE INTERFACE
1. Choose Start > Run
2. In the Run dialog box, enter cmd and then click OK.
3. Enter telnet 192.168.0.109 23 if the device's IP address is 192.168.0.109 and then press Enter.
(The 23 on the end changes the port communication to 23).
E:\Users\Hornet>telnet 192.168.0.109 24
4. The device will display a # as the command prompt. The device is now ready to execute the API
commands.
username : admin
password :
Welcome to HT-CALIPSO.
~ # |
Hall Technologies
March 30, 2023
Page 4 of 10
Advertisement
Table of Contents
