Table of Contents
Advertisement
Connecting to the HT-CALIPSO
IP ADDRESS
To connect to and communicate with the HT-CALIPSO, the controlling device needs to be on the same
network. If needed, change the IP address on your PC to be in the same IP range and same subnet as
the HT-CALIPSO. You can find out the IP address of the HT- CALIPSO by looking in the bottom right
corner of the Guide Screen (you will need to connect the HT- CALIPSO to a display).
ENABLING TELNET CLIENT
Before logging in to IP controller via command-line interface, make sure that Telnet Client is enabled.
By default, Telnet Client is disabled in Windows OS. To turn on Telnet Client, do as follows.
1. Choose Start > Control Panel > Programs
2. In the Programs and Features area, click Turn Windows features on or off.
3. In the Windows Features window, select Telnet Client check box.
Hall Technologies
March 30, 2023
Page 3 of 10
Advertisement
Table of Contents
