Operation; Auto Mode - Iridium LED WASH PRO 44WS 44x20W Manual

Upload
RP-01
Edit Mode
RP-11
01
Custom Mode
11
Slave Mode Slave
2500k
3000k
CAL White
3500k
4000k
4500k
5000k
6000k
7000k
8000k
9000k
10000k
AUTO 01

AUTO MODE

AUTO 15
RED
GREEN
Manual Mode
BLUE
255
WHITE
0-20
Strobe
Color 1-70
Blackout
DMX State
DMX Hold
02
03
Channels Mode
04
09
12
01
31
0

Operation

DMX-In this menu,you can connect several pieces of lights with DMX cable and control them with
control console.
1. Press "ENTER" button and then UP or DOWN button until "DMX " is showed.
2. Press "ENTER" button, and "CHANNEL" or "ADDRESS" will be showed.Then press ENTER.
1) "Channel [xx]" will be showed, "X" represents the showed DMX channel mode. You can press the
UP or DOWN button to select your desired Channel mode.
2) "xxx" will be showed, "x" represents the showed address. You can press the UP or DOWN button to
select your desired address.
RUN MODE-In this menu, you can select DMX mode or SLAVE mode.In SLAVE mode,you can select
one light as the MASTER light and other lights in SLAVE mode will run following the MASTER light.
1. Press "ENTER" button and then UP or DOWN button until "RUN MODE" is showed.
2.Press "ENTER" button, and"DMX" or "SLAVE" will be showed, then press ENTER to select your
desired mode.
SET UP-In this menu, you can adjust the value of the function.
1. Press "ENTER" button and then UP or DOWN button until "SET UP" is showed.
2. Press "ENTER" button, and there will be nine options. Then,press ENTER to select the option and
press UP or DOWN button to select the value you desire as below.
1) ID number - You can select an ID Number in this menu.Then, you can adjust the value of channel
11 to the corresponding scope and control the light individually with control console.
2) Display Led - In this item,you can select "ON" or "OFF".If you select ON,the displayer will be on all
the time.And if you select OFF,the displayer will extinguish about ten seconds later.
3) Key locks - You can select whether the password is on or off in this menu , and the password is [
DOWN ] + [ UP ] + [ DOWN ] + [ UP ] .If you select "on",then you have to input the password before
pressing the buttons.Otherwise,the light won't respond to your order.
4) Max temp - You can set the your desired Max working temperature about the light in this
menu.When the working temperature of the light exceeds the Max temperature, the color of letter
"Temp xx" showed in the menu will change from white to yellow.Meanwhile, the light will adjust the
working temperature automatically.
5) Dimmer RED - You can adjust the red brightness in this menu.
6) Dimmer GREEN - You can adjust the green brightness in this menu.
7) Dimmer BLUE - You can adjust the blue brightness in this menu.
8) Dimmer WHITE - You can adjust the white brightness in this menu.
9) Dimmer ALL - You can adjust the brightness of each color in this menu.
INFORMATION-In this menu, you can learn about the information of software, hardware and the
working time of the light.
1. Press "ENTER" button and then UP or DOWN button until "INFORMATION" is showed.
2. Press "ENTER" button, and"Software" "Hardware" or "Fix times" will be showed. Then press
ENTER, and you can see three items as below:
1) Software - This item displays the Software information.
2) Hardware - This item displays the Hardware information.
3) Fix times - This item displays the working hours about the light.