Siemens RUGGEDCOM WIN5123 Installation Manual page 10

Chapter 1
Introduction
Name
ANT2
DC
LED Indicators
The LED indicators display the following information:
• RSSI: displays the Received Signal Strength Indicator (RSSI) level
• W.LNK: displays the wireless link indication
• PWR: displays the power status
The following table displays the LED indicators for the device:
LED
WLNK is ON
WLNK is BLINKING
PWR is ON
RSSI: one LED is ON (least
significant)
RSSI: two LEDs are ON
RSSI: three LEDs are ON
RSSI: four LEDs are ON
RSSI: five LEDs are ON
RSSI: six LEDs are ON
RSSI: seven LEDs are ON
RSSI: only the last LED is ON
(most significant)
RUGGEDCOM WIN1010 Data Adapter LED Indicators
LEDs on the WIN1010 data adapter indicate the status of the WIN1010 power supply.
Name
PWR
LAN
WLNK
4
Description
Antenna 2
DC input, 10 to 30 VDC
Color Description
Green Input power is connected
Green LAN link/activity display
Green Wireless link/activity display
Connector Type
N-type female
3-pin connector
Color Description
The device is connected with and
Green receives services from the base
station; network entry is complete.
The link between the CPE and the
Green
base station is down.
Green CPE power is on.
Green RSSI < -90
Green -85 < RSSI < -90
Green -80 < RSSI < -85
Green -75 < RSSI < -80
Green -70 < RSSI < -75
Green -65 < RSSI < -70
Older Hardware
LEDs 1-7: Green
LED 8: Red
-20 < RSSI < -60
Latest Hardware
LEDs 1-6: Green
LED 7: Red
Red -20 < RSSI (Saturation)
Configuration Ports and Indicator LEDs
RUGGEDCOM WIN5123
Installation Guide