Unit Operation - Chigo PCR-06-01 Operating Instructions Manual

UNIT OPERATION

Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7&8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button.
4) Press the Mode button until the air conditioner mode indicator lights up on the control panel display.
5) Press the or until the desired room temperature appears on the control panel display. The tempera-
▲ ▼
ture ranges from 61˚F - 88˚F.
6) Select the desired fan speed by pressing the FAN SPEED button.
NOTE: Dur ing hot days, the unit will cool the r oom most efficiently by setting the temper atur e at the
lowest setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the
exhaust hose and window kit, and keeping direct sunlight to a minimum will also improve the
cooling efficiency.
NOTE: When the unit is running on air conditioning mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
Dehumidifier Mode
1) Install the exhaust hose and window kit properly (see pages 7&8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER Button.
4) Press the MODE button until the dehumidifier mode indicator lights up on the control panel display.
NOTE: The unit oper ates at low fan speed during dehumidifier mode. The unit cools r oom slightly
dur- ing the dehumidification process. Keep the windows and doors closed to aid the effective-
ness of the unit in removing the moisture from the room.
NOTE: When the unit is running on dehumidifier mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
NOTE: The unit will not per for m in dehumidifier mode when the r oom temper atur e is lower than
50˚F .