Bosch Rotak 320 ER Original Instructions Manual page 12

OBJ_BUCH-2960-001.book Page 12 Tuesday, August 2, 2016 3:32 PM
12 | English
If in doubt contact a qualified electrician
or the nearest Bosch Service Centre.
 WARNING! Inadequate extension
cables can be dangerous. Exten-
sion cable, plug and socket must be
of watertight construction and in-
tended for outdoor use.
Cable connections should be kept dry
and off the ground.
It is recommended for increased elec-
trical safety to use a Residual Current
Device (RCD) with a tripping current of
not more than 30 mA. Always check
your RCD every time you use it.
For products not sold in GB:
WARNING: For your safety, it is re-
quired that the plug attached to the ma-
chine is connected with the extension
cord. The coupling of the extension
cord must be protected against splash
water, be made of rubber or coated
with rubber. The extension cord must
be used with a cable strain relief.
The connection lead must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
If the supply cord is damaged, it must
be replaced by a Bosch Service Centre.
 Products sold in GB only: Your prod-
uct is fitted with a BS 1363/A ap-
proved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your
socket outlets, it should be cut off
and an appropriate plug fitted in its
place by an authorised customer ser-
vice agent. The replacement plug
should have the same fuse rating as
the original plug.
F 016 L81 624 | (2.8.16)
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Maintenance

Always wear gardening gloves
when handling or working near the
sharp blades.
 Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
 Check the grass catcher frequently
for wear or deterioration.
 Examine the machine and replace
worn or damaged parts for safety.
 Ensure replacement cutting means of
the right type are used.
 Ensure replacement parts fitted are
Bosch approved.
 Before storage ensure machine is
clean and free from debries, if neces-
sary clean with a soft, dry brush.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Movement direction
Reaction direction
Wear protective gloves
Bosch Power Tools