Advertisement
WARNING: READ ENTIRE MANUAL AND COMPLY WITH ALL SAFETY AND
SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND/OR PROPERTY
DAMAGE MAY OCCUR IF INSTRUCTIONS ARE NOT FOLLOWED CAREFULLY.
UNPACKING AND SET-UP
1. Carefully unpack the lift making sure that all of the parts have been included.
2. Make sure to use the lift on a clean, smooth solid surface.
3. Place the lift saddles firmly positioned on the frame, solid surface, or manufacturers
recommended lifting points prior to lifting.
1. All moving parts have been lubricated at the factory and should be re-lubricated before
the first use and at least once every six months to prevent damage.
2. Do not use this product if worn or damaged. Examine lift for structural cracks, bends, or
other signs of damage prior to each use to ensure safe proper working condition.
3. Keep the lift clean, dry, and well maintained to extend longevity of the product.
4. When not in use, the lift must be stored in the lowest position, in a dry location.
5. Use this as a secondary lift with a balanced load that is firmly positioned and secured at
all times.
1. Load should not exceed rated capacity for this lift – 1100lbs (500 kg)
2. Only trained people should operate the lift.
3. Indoor use recommended.
4. Do not move the lift while loaded.
5. Keep hands, tools, and other extremities from any moving parts.
6. Maintain a safe working environment. The work area should be clean, dry, clutter free,
and sufficiently lit.
7. Wear proper safety attire. Do not wear loose fitting clothing while operating lift, long
hair and sleeves should be secured.
8. Keep children and bystanders away from work area. Do not let children operate or play
on lift.
9. Do not use if under the influence of drugs or alcohol. Operator must be alert at all times
when using heavy lift equipment.
10. Never operate the lift with someone on it.
11. Use this lift only for the work it is intended. Do not use this product for an application
for which it was not designated. Misuse can lead to personal injury and/or property
damage.
12. Install safety bar (24) in appropriate hole to prevent lift from lowering. Lower the lift
against the safety bar prior to performing work.
13. DO NOT USE AN IMPACT DRIVER TO OPERATE THE LIFT!
INSTRUCTIONS
OPERATION & MAINTENANCE
SAFETY PRECAUTIONS
1
Advertisement
