Related Manuals for Wascomat D7-550
Summary of Contents for Wascomat D7-550
- Page 1 User manual Tumble dryer D7-550 Type N2... 438921563/EN Original instructions 2023.03.01...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 Additional safety precautions for gas heated tumble dryer .............7 General safety information......................7 Commercial use only........................7 Copyright ..........................7 Symbols............................7 2 Program description ..........................8 General.............................8 Program description ........................9 3 Handling ............................12 Load ............................12 How to start the machine ......................13 Additional functions........................14 When program has ended ......................15 4 Error codes ............................16... -
Page 5: Safety Precautions
User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • The machine is not to be used if industrial chemicals have been used for cleaning. •... - Page 6 User manual • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire.
-
Page 7: Additional Safety Precautions For Gas Heated Tumble Dryer
User manual 1.1 Additional safety precautions for gas heated tumble dryer • Before installation, check that the local distribution conditions, nature of gas and pres- sure and the adjustment of the appliance are compatible. • The machine is not to be installed in rooms containing cleaning machines with per- chloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING HY- DROCARBONS as cleaning agents. -
Page 8: Program Description
User manual 2 Program description 2.1 General The machine is equipped with a number of programs adapted to the range of use to which the machine is intended — different markets use different programs. The following program description is a short description of some exam- ples of programs that can be used. -
Page 9: Program Description
User manual 2.2 Program description There are two types of programs, automatic programs and time programs. • Automatic programs has moisture detection and will stop when selected dryness is achieved. • Time programs has no moisture detection and will stop when the preset or selected time has ended. During a drying cycle, when the square in the lower right corner is fully ticked, it indicates that the heating unit is ac- tive / ON. - Page 10 User manual Automatic programs Program name Care label Program description and display symbol NORMAL TEMP Normal temperature. EXTRA DRY The program will stop automatically when the garments are extra dry. Low temperature. LOW TEMP EXTRA DRY The program will stop automatically when the garments are extra dry. NORMAL TEMP Normal temperature.
- Page 11 User manual Time programs Program name Care label Program description and display symbol NORMAL TEMP Normal temperature. DRIES SET TIME Different drying times can be selected. The program will stop when the time is up. Low temperature. LOW TEMP DRIES SET TIME Different drying times can be selected.
-
Page 12: Handling
User manual 3 Handling 3.1 Load Note! Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left. Metal objects might cause damage to the drum. Load the goods into the machine according to recommendations and close the door. Make sure the filter is clean and clean if necessary. -
Page 13: How To Start The Machine
User manual 3.2 How to start the machine Select program: Automatic programs Select program by pressing the up and down buttons. Button Example of programs NORMAL Start the machine by pressing the start button. Time programs Select program by pressing the up and down buttons. Button Example of programs NORMAL... -
Page 14: Additional Functions
User manual 3.3 Additional functions There is a menu with additional functions available for selection after start. When pressing the start button the menu will appear on the display. Select from the menu by pressing the up and down buttons and press the start button to activate. Note! Some of the functions may not be available or active on your machine. -
Page 15: When Program Has Ended
User manual 3.4 When program has ended Note! For the best possible drying result it is important to empty the machine as soon as the program has ended. If the machine is not emptied as soon as the program has ended the drum will rotate in short intervals in order to keep the goods from being wrinkled. -
Page 16: Error Codes
User manual 4 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 12:11 DRYING ERROR WITH RMC The longest permitted RMC time has been exceeded. -
Page 17: Maintenance
User manual 5 Maintenance 5.1 General It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically performed. Note! Lack of maintenance may deteriorate the performance of the machine and may cause damage to components. -
Page 18: Machines With Residual Moisture Control (Rmc)
User manual Remove any lint and dust around the machine. 5.4 Machines with residual moisture control (RMC) At regular basis, wipe off/clean drum and lifters with citric acid (Acidum citricum). If soap/softener residue remains, it is recommended also to use a coarse sponge. Lack of cleaning can affect the functionality of the residual moisture control. -
Page 19: Disposal Information
User manual 6 Disposal information 6.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 20 Electrolux Professional AB 341 80 Ljungby, Sweden Share more of our thinking at www.wascomat.com...