Flash Duration; Pause Duration - Philips VOIP4331 User Manual

Flash duration

This option is helpful when using operator services. The default value of Flash time that is preset in your
VOIP 433 should be the best suited for your country network and therefore you should not need to change it.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN

Pause duration

Your phone comes with 2 factory programmed pause durations.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press UP / DOWN
Area code stripping
This section is applicable to models with Area Code Stripping option only.
Area code stripping removes an area code as specified by you from any incoming caller ID.
To activate and program the area code to be stripped :
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press LEFT / RIGHT
5. Press DOWN
Other features
to select SETTINGS, and then press OK.
to select FLASH. Press OK.
to select the desire Flash duration. Press OK.
to select SETTINGS, and then press OK.
to select PAUSE. Press OK.
to select PAUSE 1 or PAUSE 2. Press OK.
to select SETTINGS, and then press OK.
to select AREA CODE. Press OK.
to select ON.
. Enter area code . Press OK to confirm.
US
33