Polaris RZR RS1 2019 Owner's Manual page 33

SWITCHES
IGNITION SWITCH
The ignition switch
position, key-operated switch. Use the
ignition switch to start the engine. See
page 50 for engine starting
procedures.
POSITION
OFF
ACCESSORY
ON
START
The key can be removed from the switch when it is in the OFF position.
HEADLIGHT SWITCH
The ignition switch key must be in the ON/
RUN position to operate the headlights.
Press the top of the switch to place the
headlights on high beam. Move the switch to
the center position to place the headlights
on low beam. Press the bottom of the switch
to turn off the headlights.
If the headlight switch is ON when the
ignition switch is turned off, the lights will
remain on for approximately 20 seconds.
q
is a four-
The engine is off. Electrical circuits are off, except
accessory 12V.
The engine is off. Provides power to the accessory
terminal block.
Electrical circuits are on. Electrical equipment can be
used.
Turn the key to the START position to engage the
electric starter. The key returns to the ON position
when released.
FEATURES AND CONTROLS
FUNCTION
31