Advertisement
Note: 1. After turning on the machine till the carriage moving back to home position, the processing indication
shows as: A. – 1 – 4 – 0.
Main board and Head board show the same indication.
2. The two power cable plug both are 20Pin.
3. In normal state, RUN LED is blinking; LINK LED is on; BUSY LED is on（On Main board, when
carriage moves, BUSY LED is on, otherwise it is off）;ERROR LED is off(only on when there is problem).
Chapter
Chapter
Chapter 5. 5. 5. 5.
Chapter
Software
Software
Software Installation
Software
This software consist of printer driver, printing adjustment and picture printing functions.
Please follow the following steps to install the software:
1) Turn on the computer till the system is ready, copy UDT_PrintExp
UDT_PrintExp
UDT_PrintExp
UDT_PrintExp folder. Start to install:
UDT_PrintExp
2) Double click to install
All manuals and user guides at all-guides.com
Installation
Installation
Installation
UDT_PrintExp
UDT_PrintExp to your computer, un-zip to get
UDT_PrintExp
7
Advertisement
