Siemens SITRANS LG260 Operating Instructions Manual page 35

Menu - Diagnosis
Menu item
Status signals - Function control
Status signals - Out of specification
Status signals - Maintenance
Device memory - Echo curve memory
Device memory - Measured value memory
Device memory - Measured value memory - Measured values
Device memory - Measured value memory - Recording in time
interval
Device memory - Measured value memory - Recording with
measured value difference
Device memory - Measured value memory - Start with meas-
ured value
Device memory - Measured value memory - Stop with meas-
ured value
Device memory - Measured value memory - Stop recording
when memory is full
Menu - Additional adjustments
Menu item
PIN
Date
Time
Time - Format
Probe type
Copy instrument settings
PBD-51041061
The instrument settings are copied with this function. The following
functions are available:
•
Read from sensor: Read data from sensor and store into the
display and adjustment module
•
Write into sensor: Store data from the display and adjustment
module back into the sensor
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "Setup" and "Display"
•
In the menu "Additional adjustments" the items "Reset, Date/Time"
•
Special parameters
SITRANS LG260 - Operating Instructions
Default value
Switched on
Switched off
Switched off
Stopped
Started
Distance level, percentage value level, reliabil-
ity level, electronics temperature
3 min.
15 %
Not active
Not active
Not active
Default value
0000
Actual date
Actual time
24 hours
Device-specific
35