LG Pro:Centric 55UV970H Setup Manual page 65

(Continued from previous page)
• To enable use of a randomly generated security key for SoftAP
access, set the Use Default field to "Enable" (the Security Key
field will subsequently be grayed out and the random security key
will be displayed).
• To specify your own security key for SoftAP access, set the Use
Default field to "Disable." Then, select the Security Key field and
press OK. In the data entry field, you can use the number keys on
the Installer Remote to direct enter a numeric security key, or you
can use the arrow keys to select the appropriate alphanumeric
characters—at least eight, but no more than 64—from the pop-up
virtual keyboard displayed at the bottom of the screen. Note that
the security key may not contain any special characters (:, /, \, @,
etc.). When you are done, select Enter from the virtual keyboard,
and then press OK on the Installer Remote.
• Select the appropriate values in the Wi-Fi Signal Strength and
Wi-Fi Channel fields, as required.
4. If desired, you can specify a name for this TV so that it is easy
to identify and differentiate from other TVs for which sharing has
been/will be enabled.
Note: By default, the TV name is the TV's serial number. However,
if a room number is specified in the EZ-Manager Wizard or in the
General Menu / Room Info screen, the TV name is changed to the
room number.
To edit the TV name, use the Up/Down arrow keys to select the
TV Name field, and then press OK. You can then use the number
keys on the Installer Remote to direct enter a numeric TV name, or
you can use the arrow keys to select the appropriate alphanumeric
character(s) from the pop-up virtual keyboard at the bottom of the
screen. When you are done, select Enter from the virtual keyboard,
and then press OK on the Installer Remote.
5. Once all fields are completed as required, use the arrow keys on the
Installer Remote to return to the IP Environment Menu, as necessary,
or press to exit the IP Environment Menu.
Note: While Smart Share, Screen Share, and Media Renderer settings
are clonable, DIAL and SoftAP settings, as well as the TV name cannot
be cloned.
206-4327
IP Environment Setup (Cont.)
65