Table of Contents
Advertisement
SRM-3020T
Starting Cold Engine
The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause
loss of control.
If a protective blade cover is used, ALWAYS remove blade cover
before starting equipment.
1.
Stop Switch
Move stop switch button (A)
forward, away from the STOP
position.
2.
Choke
Move choke lever (B) to COLD
START position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional four or five
times.
4.
Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly
grasp throttle handle and throttle trigger lockout with left hand and fully
depress throttle trigger to wide open position. Rapidly pull recoil starter
handle/rope (D) until engine fires (or maximum five pulls).
X7502350103
© 05/22 ECHO Incorporated
OPERATION
A
C
B
25
Advertisement
Table of Contents
