Mitsubishi Electric MSZ-FT35VG Operating Instructions Manual page 5

N
AME OF EACH PART
Indoor unit
Front panel
Air fi lter
(Air purifying
fi lter)
Air cleaning fi lter
(Silver-ionized
air purifi er fi lter)
Horizontal vane
Air outlet
Heat exchanger
Spec name plate *1
Operation indicator lamp
Remote control receiving
section
Outdoor unit
Outdoor units may be different in appearance.
*1 The manufacturing year and month are indicated on the spec name plate.
Air inlet
Wi-Fi
interface
Page 13
Emergency
operation
switch
Page 10
Air inlet (back and side)
Spec name plate *1
Refrigerant piping
Drainage hose
Air outlet
Drain outlet
Remote controller
Battery replacement indicator
Page 5
Operation dis-
play section
(Backlight
display*)
Temperature
buttons
Page 6
Operation
select button
Page 6
ECONO COOL
button
Page 8
POWERFUL
button
Page 9
i-save button
Page 8
NIGHT MODE
button
Page 9
CLOCK button
Page 5
Remote controller
When the remote controller is not used,
place it near this unit.
* The backlight turns on when using the remote controller.
The backlight goes off if the remote controller is not used for a while.
Signal transmitting
section
Distance of signal :
About 6 m
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
OFF/ON (stop/operate)
button
FAN speed control
button
Page 7
WIDE VANE
button
Page 7
VANE control button
Page 7
TIME, TIMER set buttons
Page 5, 10
forward button
backward button
TIME, WEEKLY TIMER
set buttons
Page 5, 11
RESET button
Page 5
Lid
Slide the lid down
to open the remote
controller. Slide it down
further to get to the
weekly timer buttons.
Only use the remote controller provided
with the unit.
Do not use other remote controllers.
If 2 or more indoor units are installed in
proximity to one another, an indoor unit
that is not intended to be operated may
respond to the remote controller.
EN-4
EN