Bosch Professional GDS 10,8 V-EC Original Instructions Manual page 10

OBJ_BUCH-2168-002.book Page 10 Wednesday, June 29, 2016 9:20 AM
10 | English
Reference Values for Maximum Screw/Bolt Tightening Torques
Calculated from the tensional cross-section; utilization of the yield point 90 % (with friction coefficient μ
measure, always check the tightening torque with a torque wrench.
Property Classes Standard Screws/Bolts
according to DIN 267
3.6
M 6 2.71
M 8 6.57
M 10 13
M 12 22.6
M 14 36
M 16 55
Tips
Before screwing larger, longer screws into hard materials, it is
advisable to predrill a pilot hole with the core diameter of the
2
thread to approx. / of the screw length.
3
Note: Pay attention that no metal particles enter the power
tool.
Belt Clip (see figure E)
With the belt clip 17, the machine can be hung onto a belt. The
user has both hands free and the machine is always at hand.
Holder (see figure F)
You can use the holder 18 to hang the power tool, for example
on a carabiner hook. The user has both hands free and the ma-
chine is always at hand.
Colour clip (see figure G)
You can use the colour clip 19 to individually label the power
tool.
Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Store the battery only within a temperature range between
0 °C and 50 °C. As an example, do not leave the battery in the
car in summer.
Occasionally clean the venting slots of the battery using a soft,
clean and dry brush.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Maintenance and Service
Maintenance and Cleaning
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
 For safe and proper working, always keep the machine
and ventilation slots clean.
1 609 92A 1X1 | (29.6.16)
4.6 5.6 4.8 6.6
3.61 4.52 4.8 5.42
8.7 11 11.6 13.1
17.5 22 23 26
30 37.6 40 45
48 60 65 72
73 92 98 110
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
People's Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 4008268484
Fax: (0571) 87774502
E-Mail: contact.ptcn@cn.bosch.com
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King's Road
North Point, Hong Kong
Customer Service Hotline: +852 2101 0235
Fax: +852 2590 9762
E-Mail: info@hk.bosch.com
www.bosch-pt.com.hk
Indonesia
PT Robert Bosch
Palma Tower 9
Jl. Let. Jend. TB Simatupang II S/06
Jakarta Selatan 12960
Indonesia
Tel.: (021) 3005 6565
Fax: (021) 3005 5801
E-Mail: boschpowertools@id.bosch.com
www.bosch-pt.co.id
= 0.12). As a control
total
High-strength Bolts
5.8 6.8 6.9 8.8
6.02 7.22 8.13 9.7
14.6 17.5 19.7 23
29 35 39 47
50 60 67 80
79 95 107 130
122 147 165 196
th th
& 10 Floor
10.9 12.9
13.6 16.2
33 39
65 78
113 135
180 215
275 330
Bosch Power Tools