Safety Instructions - Marmitek Connect 620 UHD 2.0 User Manual

2

Safety instructions

Please read these instructions thoroughly before you use the
x
device and keep them for future reference.
Only for indoor use.
x
Do not use the product in a damp environment or near water.
x
Do not expose the product to extremely high or low
x
temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
x
Do not open the product: the device may contain live parts.
x
Keep batteries out of the reach of children. Dispose of
x
batteries as chemical waste. Never use old and new
batteries or different types of batteries together. Remove the
batteries when you are not using the system for a longer
period of time. Check the polarity (+/-) of the batteries when
inserting them in the product. Wrong positioning can cause
an explosion.
Connect the adapter to the mains only after you have verified
x
that the line voltage corresponds to the value specified on
the type plates.
Never connect a power adapter if it's damaged. In such
x
cases, please contact your supplier.
Repairs or service should only be performed by qualified
x
personnel.
Disconnect the AC/DC power adapter from the mains when
x
this device is not in use for prolonged time.
Improper use, self-installed modifications or repairs will void
x
any and all warranties.
Marmitek does not accept any product responsibility for
x
incorrect use of the product or use other than for which the
product is intended.
Marmitek does not accept liability for any consequential
x
damage other than the legal product responsibility.
4 © MARMITEK