GreenWorks CSF401 Operator's Manual
  1. Manuals
  2. Brands
  3. GreenWorks Manuals
  4. Chainsaw
  5. CSF401
  6. Operator's manual

GreenWorks CSF401 Operator's Manual

Hide thumbs Also See for CSF401:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
CHAINSAW
FR
SCIE À CHAÎNE
ES
SIERRA DE CADENA
CSF401
OPERATOR MANUAL
MANUEL DE L'UTILISATEUR
MANUAL DEL OPERADOR
www.greenworkstools.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSF401 and is the answer not in the manual?

Questions and answers

Related Manuals for GreenWorks CSF401

Summary of Contents for GreenWorks CSF401

  • Page 1 CHAINSAW OPERATOR MANUAL SCIE À CHAÎNE MANUEL DE L'UTILISATEUR SIERRA DE CADENA MANUAL DEL OPERADOR CSF401 www.greenworkstools.com...

  • Page 2: Table Of Contents

    English Unpack the machine.......... 6 Description......... 2 Add bar and chain oil.........6 Purpose.............. 2 Install the battery pack........6 Overview............2 Remove the battery pack........7 Packing list............2 Operation........... 7 General power tool safety Examine the chain oil........7 warnings..........2 Hold the machine..........7 Work area safety..........

  • Page 3: Description

    English DESCRIPTION GENERAL POWER TOOL SAFETY WARNINGS PURPOSE WARNING This chainsaw is designed for cutting branches, trunks, logs Read all safety warnings, instructions, illustrations and and beams of a diameter determined by the cutting length of specifications provided with this power tool. Failure to the guide bar.

  • Page 4: Power Tool Use And Care

    English • Use personal protective equipment. Always wear eye • Use the power tool, accessories and tool bits etc. in protection. Protective equipment such as a dust mask, accordance with these instructions, taking into non-skid safety shoes, hard hat or hearing protection used account the working conditions and the work to be appropriately will reduce personal injuries.

  • Page 5: Causes And Operator Prevention Of Kickback

    English chain saw, make sure the saw chain is not contacting saw in a tree without proper training could increase anything. A moment of inattention while operating chain the risk of serious personal injury. saws may cause entanglement of your clothing or body •...

  • Page 6: Risk Levels

    English Symbol Explanation SYM- SIGNAL MEANING Direct current - Type or characteristic of current. CAUTION (Without Safety Alert Sym- bol) Indicates a situation that Precautions that involve your safety. may result in property dam- age. Read and understand all instructions before operating the product, and fol- ENVIRONMENTALLY SAFE low all warnings and safety instruc-...

  • Page 7: Proposition 65

    English PROPOSITION 65 ADD BAR AND CHAIN OIL Examine the amount of oil in the machine. If the oil level is WARNING low, add the bar and chain oil as follows. This product contains a chemical known to the state of IMPORTANT California to cause cancer, birth defects or other reproductive harm.

  • Page 8: Remove The Battery Pack

    English START THE MACHINE 1. Align the lift ribs on the battery pack (15) with the grooves in the battery compartment. 2. Push the battery pack into the battery compartment until the battery pack locks into place. 3. When you hear a click, the battery pack is installed. REMOVE THE BATTERY PACK 1.

  • Page 9: Limb A Tree

    English LIMB A TREE • Ensure there is no dirt, stones, loose bark, nails, or staples on the tree. 2’’(50mm) 2’’(50mm) Limbing is the removal of the branches from a fallen tree. 1. Keep the larger lower branches to hold the log off the ground (31).

  • Page 10: Maintenance

    English WARNING Remove the battery pack from the machine before maintenance. 10.1 REPLACE THE GUIDE BAR AND THE CHAIN 1. Loosen the chain cover by turning the chain cover knob counterclockwise. When the log is held on two ends (37): 1.

  • Page 11: Adjust The Chain Tension

    English 5. When the chain is at the wanted tension, tighten the chain 17 16 cover. 9. Install the chain cover. NOTE 10. Tighten the chain. Refer to Adjust the chain tension. During normal saw operation, the temperature of the chain 11.

  • Page 12: Guide Bar Maintenance

    English NOTE Make sure that the bar is turned over periodically to keep symmetrical wear on the bar. 1. Lubricate the bearings on the nose sprocket (if present) with the syringe (not included). 4. File all the cutters to the specified angles and the same 2.

  • Page 13: Troubleshooting

    English TROUBLESHOOTING Problem Possible cause Solution The motor runs Sharpen or replace Problem Possible cause Solution The chain is blunt. and the chain ro- the saw chain. tates, but the chain The guide bar and The chain is too Adjust the chain Turn the chain does not cut.

  • Page 14: Technical Data

    (3) years against defects in materials, parts or workmanship. Greenworks, at its own discretion, will repair or replace any and all parts found to be defective, through normal use, free...

  • Page 15: Exploded View

    English EXPLODED VIEW Part No. Description Part No. Description R0201088-00 Bar / Chain R0201092-00 Bucking Spikes R0201089-00 Chain Tension Knob R0201093-00 Side Cover Assembly RB33902102C Sprocket Kit R0201094-00 Auxiliary Handle Kit R0201090-00 Oil Cap Assembly R0201095-00 Scabbard R0201091-00 Hand Guard...

Table of Contents