Table of Contents
Advertisement
To cancel a program
A program can be canceled any time
after the program start.
^ Press the G button "Cancel".
The wash water will be drained away.
^ Open the drum door before starting a
new program.
To change a program
After the program start the spin speed
can be selected until the final spin
starts. The Extras "Starch Stop" and
"Rinse Stop" can be selected or
deselected.
The temperature and the Extra
"Intensive" can be selected or
deselected up to 5 minutes after the
program start.
Adding/removing laundry
during a wash program
You can interrupt the programs (see
"Program guide") to add or remove a
piece of laundry.
^ Use the a button to open the door.
^ Add or remove the piece of laundry.
^ Close the drum door.
The program will continue
automatically.
Note:
Once the program has started the
washer cannot make adjustments to the
load size. After adding or removing
laundry, the washer will default to the
water and electrical consumption of a
full load.
The time remaining will automatically be
adjusted.
The drum door cannot be opened if:
– the water temperature is higher than
131°F/55°C.
– the water level is too high.
– the program has reached the "Final
Spin".
When operated with a coin
mechanism the machine will be
locked after 3 minutes. Canceling or
changing a program and opening
the door is no longer possible.
Use
15
Advertisement
Table of Contents
