Page 1
3. It is important that the end user receives this document. Van Guard Accessories Ltd This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for Fair Oak Close, Exeter Airport Business Park, manufacturing purposes, copied nor communicated in any way to third parties without written Exeter, Devon, EX5 2UL permission from VAN GUARD ACCESSORIES LTD.
Page 2
Bend the two side tabs up (the same way as the side end returns). Take care to Position the bulkhead into the vehicle and rest on the vehicles existing bottom weaken the tabs by bending them the wrong way. bulkhead. Ensure that the bulkheads returns are facing into the load area as shown in step 1.1.