Wildix Cleod9 WP480G User Manual

BLF / Function keys
Function keys must be set up in Collaboration Settings -> Function keys
or by the PBX administrator.
This phone supports up to16 Function keys distributed over 2 pages. Use
Navigation keys to move between pages.
Make a call
Enter the number and press Send Soft key.
To switch between speaker mode and handset mode during a call:
press Speaker key. To switch between speaker mode and
headset mode during a call: press Headset key.
Dial a user for whom you have assigned a Colleague Function key:
press the corresponding Function key.
Call from call history: press History Soft key from idle and select
the number using Navigation keys, then press Dial Soft key. Call
from Phonebooks
1. Press Phonebook key.
2. Press Filter Soft key and select the phonebook
3. Press Search Soft key to search this phonebook and enter the
name or phone number
Press Enter Soft key and select the contact using Navigation
4.
keys
5. Press Dial Soft key
Phonebooks must be set up by user via Collaboration or by the
PBX administrator.
Mute the microphone during a call
Press Mute key to mute / unmute the microphone.
Hold / Second call
Press Hold Soft key during a call to put a call on hold.
Press New Soft key to make a second call, then enter the number
manually or press Select Soft key to search for the contact in call
history / in phonebooks.
Call Park
1. Press the Navigation Key Right Arrow
2. Press the "Park X" button (i.e. Park 1, Park
2, etc.)
3. Hang up
Call Park Pick Up
1. Press the "Park X" button (i.e. Park 1, Park
2, etc.) that contains the caller you wish to
retrieve.
Call transfer
Blind transfer (the desired party/extension is not notified of the
impending transfer)
1. Press Transfer key during a call (the call is put on hold)
2. Dial the desired party/extension
Press Transfer key
3. & Hang up
Blind transfer via Colleague BLF / Function key: make sure Direct
transfer option is enabled for this Function key in Collaboration:
1. Press the corresponding Function key during a call
2. Hang up
Attended transfer (the desired party/extension is notified)
1. Press Transfer key during a call (the call is put on hold)
2. Dial the desired party/extension
3. Notify the third party of the impending transfer
4. Hang up to transfer the call
Attended transfer via Colleague BLF / Function key: make sure
Direct transfer option is disabled for this Function key in
Collaboration:
1. Press the corresponding Function key during a call (the
current call is put on hold)
2. Notify the third party of the impending transfer
Press Transfer
3. & Hang up
Conference
1. Place your first call.
Once the party has answered the call, Press New
2.
second call to the contact you would like to invite to the
conference call
3. When the third party answers, press Conference Soft key.
Access Voicemail
1. Press Voicemail key
2. If requested, enter the first five characters of your password
3. Select the message and press Play Soft key to listen to it;
press Info Soft Key for more information or to delete the
message.
Call Features
Press Features Soft key from idle to set the following call features
for each call type (Internal, External, Blacklist, Whitelist), based on
user status (Available, DND, Away): Call reject, Call forwarding, Call
Waiting, Mobility, Ring Tone.
Features can be also set up in Collaboration Settings -> Features.
to make a
User Guide
WP480G