Download Print this page
Wildix UBICONF-VOICE User Manual

Wildix UBICONF-VOICE User Manual

Conference speakerphone with 2 external microphones

Advertisement

Quick Links

 
Answer / Hang up a call via Bluetooth  
Short press the button
to answer an incoming call, long 
press to reject an incoming call.  
During a call, short press the button
 
Turn off the Bluetooth function  
Press and hold (2secs) the Bluetooth button
 
Mute the speakers  
Press the button
to mute the speaker, the button turns 
red.  
 
Mute the microphones  
Press the button
to mute the microphones, the button 
turns red.  
 
Adjust volume  
Press the button
to increase the volume level.  
Press the button
to decrease the volume level.  
 
ON/OFF switch  
Move the switch situated on the sidebar to ON position: 
ubiconf-Voice is now using the built-in battery.  
ON/OFF state does not affect USB charging and USB 
connection to the PC.  
Note: keep the switch in the OFF position to save the 
battery power, when you are not using the unit.  
 
Separate microphone selection  
Press the button
to turn on only one microphone 
which is closer to the talker and mute two others. The 
operating microphone's indicator turns green. 
- 3 -
Charging the unit  
The battery indicator
less than 10 minutes of talk time remain. Connect the unit to 
the PC or charging adapter to charge the battery.  
to hang up.  
Note: when using the charging adapter, make sure it is a 
qualified one and the output voltage is less than 5V.  
Sound pickup range  
.  
In normal room conditions, the reception distance can reach 
up to 4 meters. Three built-in microphones provide 
360-degree coverage.  
The sound pickup range may differ depending on the 
operating environment and conditions. 
Connecting external mics UBICONF-VOICE-2EXTMIC 
Connect the microphone cord to one of the MIC ports 
situated on the back of the ubiconf-Voice speakerphone. 
Position the microphones for the best voice pick up. 
 
Muting/Unmuting the microphones during a call   
The microphones volume is on by default when the 
ubiconf-Voice speakerphone is powered on. 
Tap the button
the microphones, including the 3 microphones on the 
ubiconf-Voice speakerphone. All microphone indicator lights 
turn red. 
Tap the button
unmute all the microphones. 
turns red and flashes, when 
on the expansion microphone to mute all 
again on the expansion microphone to 
- 4 -
 
 
 
 
 
 
 
 
 
 
 
 

Advertisement

loading
Need help?

Need help?

Do you have a question about the UBICONF-VOICE and is the answer not in the manual?

Questions and answers

Summary of Contents for Wildix UBICONF-VOICE

  • Page 1   Mute the microphones   Connect the microphone cord to one of the MIC ports  situated on the back of the ubiconf-Voice speakerphone.  Press the button to mute the microphones, the button  Position the microphones for the best voice pick up. ...
  • Page 2 Key instruction  Connecting to PC or laptop        Connect your ubiconf-Voice to the USB port on your PC or    laptop using the USB cable.    Note: PC automatically recognizes ubiconf-Voice but you    need to select ubiconf-Voice in device selection options of ...

This manual is also suitable for:

Ubiconf-voice-2extmic