Safety Precautions; Repair Precaution - Samsung SM-F711B Service Manual

CONFIDENTIAL

1. Safety Precautions

1-1. Repair Precaution

Before attempting any repair or detailed tuning, shield the device
from RF noise or static electricity discharges.
Do not touch metallic parts or circuits with your bare hands
as device(parts, circuits, etc) may be corroded.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of the low
margin of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily damaged,
even with relatively low heat. Never use a soldering iron with a power rating of more than 100
watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replacement
parts may not function properly.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.