Samsung SM-F711B Service Manual page 126

1. SVC Tech Information
1-5. AOD Setting Information
- Temperature & Time
:
→
- Suction pad type & location
∙ Place device in the AOD Plastic Guide
Apply Cap Protection Tape to both Caps at the Hinge
∙ AOD Configuration
: Replace the left Vacuum Seal in AOD with the Blue Vacuum Seal. (28mm: GH81-18491A)
: Apply Scotch Tape over the middle vacuum to prevent air leakage.
: Using a Screwdriver, remove four (4) screws to temporarily remove the lip.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
CONFIDENTIAL