Zero Return, Time Search 31 - Magnavox MC132EMG Owner's Manual

MC132EMG\MC192EMG 1/31/03
Zero Return
Set the counter to zero at a location you want to reach later.
1
Play, rewind, or fast forward the tape to the location
you would like to refer to later. Press STOP/
stop the tape.
2
Press RESET to set the counter to 0:00:00.
3
When you later want to return to this point,
press MENU. Press PLAY/
select ZERO RETURN. Then, press F.FWD/B.
The counter will appear on the screen. When the tape
reaches the point at which you set the counter to zero,
the tape will stop. Press PLAY/
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
Time Search
Time Search lets you rewind or fast forward a tape to a posi-
tion by entering the amount of playback time you want to
skip.
1
When a tape is in the TV/VCR, press TIME
SEARCH.
2
Press PLAY/
time appears (for example, 2:50 for 2 hours, 50 min-
utes). Each press increases the time by 10 minutes.
To cancel the Time Search at this point, press MENU.
TIME SEARCH
2 : 50
3
Press REW/s or F.FWD/B. The TV/VCR will
rewind or fast forward the tape by the specified
amount of time. The time counts down on the screen
as the search progresses. When 0:00 is reached, the
tape will start playback automatically.
Or, to cancel the time search before it finishes, press
STOP/ .
10:41 AM Page 31

Zero Return, Time Search 31

or STOP/
to watch the tape.
or STOP/ until your length of
3
to
to
2
2-3
1
• Time Search can be set up to a
maximum of 9 hours 50 minutes
(9:50) in 10-minute increments.
• Time Search is not available dur-
ing recording.
1
Helpful Hints