Kompernass KH 4083 Operating Instructions Manual page 50

Checking the programmed data
Press the „M" button twice. The current programming is shown in the
display y .
Press the button to switch through the programme.
To leave the Programme-Mode, continue to press the „M"
button until a bar appears over
The watering computer is once again operating in automatic
mode.
Deleting Programmed Data
Press the „M" button until a bar is shown over
Press the button until the number of the desired programme
blinks in the display
Press the
The programme is deleted and the programmed time is no longer
shown in the display
Continue to press the „M" button until a bar appears over the
in the display
y .
button.
y .
y .
in the display
- 48 -
y .
in the display y .