Only use Alkaline batteries. Do not use rechargable batteries.
They do not provide enough output to operate the appliance.
Pull the battery compartment
Insert two AA-Batteries, taking note of the polarities, in the battery
compartment
Push the battery compartment
compartment
Whilst the batteries are being exchanged, „PO" appears in the dis-
play
y
.
For as long as the PO display is blinking, the watering computer
will retain its programming. If the display goes blank, the program-
ming has also been deleted.
Connecting to the water mains
Screw the inflow connector
(1"-external thread).
Screw the outflow connector
Ensure that the outflow connector
Setting the Clock
Open the cover
Press the „M" button until a bar
symbol and a bar blinks under „"MON".
w
w
.
w
must click in audibly.
q
e
r
.
out of the housing.
w
back into the housing. The battery
on to a suitable 3/4" water tap
on to a water hose.
e
is always pointed downwards.
y
appears in the display above the
- 42 -