Kompernass KH 4083 Operating Instructions Manual page 49

Select with the „+" button or the „–" button the desired weekday.
is shown in the display
on the programmed day.
Press once on the
In the display y
med day. The bar shows the programmed weekday.
Confirm your selection with the
Select a programme number with the „+" or „–" button.
The number of the programme position is shown in the display
to the symbol.
Confirm your selection with the
Set the watering time as described under „Programming the
watering timings".
Press the „M"-Button until a bar is shown over
display y .
The watering computer is now in automatic mode and will execute the
configured programs.
y on the left. Watering does not take place
button.
is shown. Watering takes place on the program-
- 47 -
button.
button.
in the
y next