Kompernass KH 4083 Operating Instructions Manual page 46

The watering computer is now in the programming mode. Blinking in
the display y , to the right of the % symbol, is the notification 100%.
Setting the amount of water through-flow.
You can set the amount of water through-flow from 10% to 200%.
Press the „+" button or the „–" button to set the desired amount of
water through-flow.
Confirm your selection with the
The amount of water through-flow is controlled by the period of
water flow.
Examples: You have programmed a 100% water through-flow amount
for 10 minutes: the watering computer permits through-flow for 10 minutes.
You have programmed a 50% water through-flow amount for 10 minutes:
the watering computer permits through-flow for 5 minutes.
You have programmed a 200% water through-flow amount for 10 minutes:
the irrigation computer permits through-flow for 20 minutes.
Programming the watering frequency
Blinking in the display
number from 1–7.
Select the settings for watering frequency with the „+" button or the
„–" button.
button.
y , to the left of the
- 44 -
-Symbol, is a C or a