Table of Contents
Advertisement
Installing the system board
1
Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis.
2
Tighten the screws (6-32xL6.35) that secure the system board to the chassis.
3
Connect the hard drive, optical drive, power supply unit cable and speaker cables to the system board.
4
Place the I/O port bracket and tighten the screw (6-32xL6.35).
5
Install the:
a
processor
b
coin cell battery
c
memory module
d
expansion card
e
heat sink
f
speaker
g
power supply unit
h
cooling shroud
i
optical drive
j
2.5 inch hard drive
k
3.5 inch hard drive
l
front bezel
m
cover
Removing and installing components
25
Advertisement
Table of Contents
