Rifox RIFOmat 1222 Operating Manual

Operating Manual
1

Safety instructions

1.1

Proper use

Any improper use, intervention in the design and deviation from the design data automatically lead to termination of the
warranty. The fl oat-controlled condensate trap model 1222 is designed for the discharge of condensate from steam, com-
pressed air and pressure gas systems. Any other usage is not permitted. The manufacturer is not liable for damage resulting
from any other usage. The user or operator bears the risk in this case. This also applies analogously to incorrect assembly,
startup, use and maintenance.
1.2

Warnings and symbols

■ Personal risk due to escaping operating medium because of pressure, temperature and weight. Failure to comply with
these warnings results in the risk of accidents.
■ Follow the instructions in this operating manual.
■ The operator must ensure that this operating manual and, if necessary, other relevant documents are available on site.
■ Only trained or instructed personnel may be assigned to handling this equipment.
■ Any mode of operation that may impair safety must be avoided.
2

General description and usage

2.1

Design of the condensate trap

Oben Links
278,5 20
RIFOX - Hans Richter GmbH Spezialarmaturen
Bertha-von-Suttner-Str. 9
RIFOmat Float-Controlled Trap, PN 40
Picture 1: Vario 1222
with fl ange
1 Housing fl ange part
2 Housing gasket
Housing side part
3
4 Control screw
Housing screws
5
6 Screw plug
7 Float control assembly
Complete Supporting Structure
8
9 Float
D-28207 Bremen Fax: +49 (0) 421 499 75 - 40
Model: 1222
10 Supporting screw
11 2 Gaskets for sight glass
Sight glass - glass
12
13 Gasket
Gasket
14
15 Gasket
16
Stud bolts and nuts
17 RWG frame
Fon: +49 (0) 421 499 75 - 0
Picture 2: Vario 1222
with threads
Internet: www.rifox.de
Email: contact@rifox.de
Breite: 1
Höhe:8,
Page 1 of 6