Table of Contents
Advertisement
10
Program Change
Message Format:
CnH ppH
n:
MIDI Channel Number
pp:
Program Number (Note1)
:
Note1
For details about the relationship between the program number and the tone, see the Tone List that comes with
the Instrument.
Transmit Sent when a tone is selected.
Receive Receipt changes the tone of the corresponding part. The selected tone is determined by the
program value of this message and the Bank Select message value received prior to this message. Also
note that receipt of this message also may change the Timbre Type that corresponds to the selected
tone. For more information, see "About the Timbre Type" below.
About the Timbre Type Tones that are selected by each Instrument part have an attribute that
depends on the sound source operation type. This attribute is called the "timbre type," which is one of
the types described below.
• Melody
This timbre type optimizes for normal melody tones.
• Drum
This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel
Coarse Tune, and Master Coarse Tune messages are ignored if they are received.
11
Channel Pressure (Aftertouch)
Message Format:
DnH vvH
n:
MIDI Channel Number
vv:
Value
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
12
Pitch Bend Change
Message Format:
EnH llH mmH
n:
MIDI Channel Number
ll:
Value LSB
mm:
Value MSB
Transmit Sent when the pitch bend wheel is operated. (CT-S300)
Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the Pitch Bend Range value setting.
14
Advertisement
Table of Contents
