Mechanical Specifications; Idu To Odu Cable Specifications - Siemens RUGGEDCOM WIN5118 Installation Manual

Hide thumbs Also See for RUGGEDCOM WIN5118:
Table of Contents

Advertisement

RUGGEDCOM WIN5118
Installation Guide
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure
b
Non-condensing
Section 4.5

Mechanical Specifications

Weight
Ingress Protection
Enclosure
Section 4.6

IDU to ODU Cable Specifications

IDU to ODU Cable
Applications
General Construction
Conductor Size
Outer Jacket Material
Outer Diameter
Weight
IDU to ODU Cable Design and Materials
Conductor Material
Conductor Size
Insulation Material
Insulation O.D.
Color Code
Overall Foil Shield
Overall Shield Material
Overall Foil Design
Overall Drain-wire Material
Mechanical Specifications
2000 m (6562 ft)
1.5 kg (3.3 lb)
IP67
Aluminum
Outdoor installations, fixed or portable installations, digital distribution frames in transmission stations,
outdoor installations in harsh environments.
Custom made cable designed specially for wireless systems, meeting the requirements of Cat. 5e per
ANSI/TIA/EIA-568-B.2 and IEC 61156-5. The cable contains 4 twisted pairs, cabled, foil-tape shielded and
jacketed with two special black UV resistant, flame retardant PVC compounds for direct outdoor use in
harsh electrical environments. The diameter of the inner core complies with RJ45 connecting hardware
allowing direct connection to equipment without patch cords.
0.52 mm
UV resistant FR-PVC
7.9 mm (0.31 in) nominal
68.0 kg/km
Bare Copper
24 AWG
Solid PO
1.07 mm (0.04 in)
Per TIA/EIA 568-B
Yes
Aluminum/Polyester Foil
100% Coverage
Tinned Copper
Chapter 4
Technical Specifications
31

Advertisement

Table of Contents
loading

Table of Contents