Toro GrandStand 71504 Operator's Manual page 5

Decal 112-3858 is for machines with 60in decks only.
1. Read the Operator's
Manual.
2. Read the Operator's
Manual before performing
maintenance.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 75 to 81 N∙m (55 to 60 ft-lb).
1. Read the Operator's
Manual.
112-3858
3. Remove the key before
adjusting the height of cut.
4. Height-of-cut settings
116-8283
116-8775
2. Warning—fill to the bottom
of the filler neck; do not
overfill the tank.
decal112-3858
1. Read the Operator's
Manual.
2. Short, light grass; dry
conditions
decal116-8283
decal116-8775
1. Read the Operator's
Manual.
5
131-1180
3. Bagging setting
4. Tall, dense grass; wet
conditions
131-3507
2. Belt tensioner
decal131-1180
decal131-3507