Operating The Ignition Switch; Starting The Engine - Toro GrandStand 71504 Operator's Manual
With 48in, 52in, or 60in turbo force cutting unit
Hide thumbs
Also See for GrandStand 71504:
- Operator's manual (60 pages) ,
- Operator's manual (60 pages)
Table of Contents
Advertisement
Operating the Ignition
Switch
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
Figure 14
Figure 15
Starting the Engine
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
g031239
g031281
17
Figure 16
g301289
Advertisement
Table of Contents
