Shelf Supports - Bosch HB 37 N Series User Manual And Installation Instructions

15.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
ATTENTION!
The self-cleaning surfaces in the cooking compartment
may be damaged by detaching and attaching the pull-
out rails.
Detach the rails before detaching or attaching the
▶
pull-out rails.
Note: If necessary, you can use pull-out rails on all
levels.
Push on the tab marked PUSH behind the rail, and
1.
push the rail to the rear.
Keep the PUSH tab pushed back
2.
rail outwards ⁠ .
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
4.
5.
15.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
1.
and swing the
2.
Remove the pull-out rail.
Clean the pull-out rail.
→ "Cleaning products", Page 15
Insert the pull-out rail between the two bars.
Push the retainer in between the lower and the
upper bar.
Shelf supports en
19